1A/310 Boundary Road Dingley Village VIC 3172 03-95873200 mrsolar@mrsolar.com.au

Solar Pumps

It may not always be cost effective or convenient to provide a permanent power supply to an area where you require to use a pump. We can therefore supply a range of Solar Operated Pumps.

It’s a well known fact that water pumping is electrically very inefficient. One of the main reasons for this Is that domestic water pumps are often as low as 60% efficient, this coupled with long daily running times will place a huge burden on a property’s electrical supply.

It makes sense then to utilise solar power for water pumping. Generally speaking water is required when the sun is shining.

When the sun shines, solar panels produce power and water is pumped.

A simple approach that works day in day out 365 days of the year.

For example:

	Submersible Pump
	Pool Pump
	Pond Pump

Solar Operated Submersible Pump System

Lorentz PS1200HR/C

A submersible solar pump is directly powered by solar panels, thus requiring no batteries. When the sun shines, the variable speed DC brushless pump will start pumping and continue pumping until there is insufficient sun. As an option the solar panels can be mounted on a mechanical sun tracking system that will provide maximum output from the solar panels.

It is possible to pump water for up to 14 hours per day in summer using the optional suntracker.

Water can be pumped from as deep as 240meters. Systems can be configured to suit your daily water needs and lift requirements.

Application

	Drinking water supply
	Livestock watering
	pond management
	Irrigation
	almost any other application you can think of

Characteristics

	Lifts up to 240 m
	flow rate up to 11.0 m3/h
	simple installation
	maintenance-free
	high reliability and life expectancy
	cost-effective pumping

Components and features

	Controller PS 1200 controlling of the pump system and monitoring of the operating states mounted at surface (no submerged electronic parts) two control inputs for well probe (dry running protection), float or pressure switches, remote control etc. automatic reset 20 minutes after well probe turns pump off protected against reverse polarity, overload and high temperature speed control, max. pump speed adjustable to reduce flow rate to approx. 30% solar operation: integrated MPFT (Maximum Power Point Tracking) battery operation: low voltage disconnect and restart after battery has recovered max. efficiency 92 % (motor ÷ controller) enclosure: IP 54 (sealed, weatherproof)
	Motor ECDRIVE 1200 HR/C brushless DC motor no electronics inside motor water filled lP68, pressure balanced, max. submersion unlimited dynamic slide bearings, material: carbon/ceramic wetted material: stainless steel (AISI 316), POM, rubber, cable drinking water approved
	Pump End (PE) High life expectancy none-return valve dry running protection (optional) material: stainless steel (AISI 316), rubber
	For HR Pumps Only helical rotor pump (positive displacement pump) two main parts only: stator and rotor, field serviceable stator: geometry made of abrasion resistant rubber rotor: stainless steel, hard chrome plated, abrasion resistant more resistant to damage by sand than other pump types self-cleaning

Solar Pool Pump System (Centrifugal Surface Pump)

Lorentz PS660 BADU Top 12

Application

	Swimming pool water circulation through a filter system and thermal collectors
	Pond Management
	Irrigation
	Aquariums
	Fish Farms

The Badu Top pump is ideally suited to all water circulation applications, including swimming pools, which means all parts used are perfectly compatible with chlorinated or salt water. The motor used is a DC brushless type achieving an outstanding overall efficiency of 92%, the high efficiency means less wasted energy. As the motor is brushless, you can expect years of maintenance free operation.

The Badu Top is perfectly suited to homes utilising alternative energy, and can also be used with an optional power supply for considerable power savings in suburban homes.

The Badu Top will cost you more than an ordinary 240 volt pool pump but will save you considerable money for the supporting solar panels and batteries or electricity savings. Based on a 8hr daily run time in a solar battery system, the Badu Top can save up to 5kwh per day.

Characteristics

	flow rate up to 15.0 m3/h
	maintenance-free thanks to brushless DC motor
	excellent efficiency

Components and features

	Controller PS 600 controlling of the pump system and monitoring of the operating states mounted at surface (no submerged electronic parts) two control inputs for well probe (dry running protection), float or pressure switches, remote control etc. automatic reset 20 minutes after well probe turns pump off protected against reverse polarity, overload and high temperature speed control, max. pump speed adjustable to reduce flow rate to approx. 30% solar operation: integrated MPFT (Maximum Power Point Tracking) battery operation: low voltage disconnect and restart after battery has recovered max. efficiency 92 % (motor ÷ controller)
	Motor ECDRIVE 600 BADU  Top brushless maintenance free DC motor
	Pump End (PE) BADU top 12 monoblock-type pump with integrated strainer tank bellow mechanical seal is mounted on a plastic shaft protected sleeve motor/pump shaft has no contact with fluid total electric separation strainer capacity approx 3 litres strainer basket mesh size approx. 3.2 x 2.6mm

Pond Pump System

The environmentally friendly alternative: Sunlight as an energy source, these pumps allow free operation by using solar energy, independent of power grids anywhere sunlight is available.

The high quality module makes solar powered fountains possible until sunset and with the addition of a battery system operation can be extended